La-z-boy Reclining Sofa prior to 12/31/2012 User Manual download pdf (Page 7)

Motion-Modular units with metal base rails have one locking latch bracket and one latch bracket on

the right side (sitting) of modular units without right side arms, and two stud mounts with threaded

studs on the left side (sitting) of modular units without left side arms (F

IGURE 1).

Motion-Modular units with wood legs have one side mount locking latch bracket and one side mount

latch bracket on the right side (sitting) of modular units without right side arms, and two threaded

studs on the left side (sitting) of modular units without left side arms (FIGURE 2).

5. Use a T-30 torx driver to loosen the threaded studs to approximately 1", this measurement may

vary depending on the fabric and style (F

IGURE 3). The threaded studs are located on the left side

(sitting) of modular units without left side arms.

6. Align the units to be joined next to each other. Move the unit with the latch brackets approximately

4" forward of the unit with the threaded studs. The latch brackets are located on the right side

(sitting) of modular units without right side arms.

7. Slide the unit with the latch brackets back until the threaded studs are securely engaged in both

the front and rear latch brackets. The rear bracket is not a locking bracket.

NOTE: Due to variations in upholstery and style the threaded stud length may need to be adjusted

to fit into the latch brackets. Loosen or tighten the threaded studs to provide adequate clearance.

8. Continue connecting the modular units until all have been securely joined.

9. All modular units must be disconnected to safely move the modular group. To disconnect the units,

apply pressure to the swing arm of the locking latch bracket (F

IGURE 4) and slide the unit forward.

Repeat this step to disconnect the remaining units.

FIGURE 1

Latch Bracket

Threaded

Stud

Mount

Locking Latch

Bracket

FIGURE 2

IGURE 3

IGURE 4

Side

Mount

Latch

Bracket

Side Mount

Locking

Latch

Bracket

Threaded

Stud

Threaded

Stud

Threaded

Stud

Mount

Base Units

Leg Units

Locking Latch

Bracket

Side Mount Locking

Latch Bracket

La-Z-Time

Motion Upholstery and La-Z-Time

Motion-Modulars

Assembly Instructions

NOTICE – To reduce the risk of product damage:

• The purpose of the latch bracket system is to connect the units and prevent them from

being separated. The latch bracket system does not provide adequate structural support

for the movement of latched units. Do not move the units while latched together,

damage may occur.

La-Z-Time

Motion Upholstery and La-Z-Time

Motion-Modulars

Assembly Instructions

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

La-z-boy Reclining Sofa prior to 12/31/2012 User Manual Page 7

Comments to this Manuals

Related products and manuals for Furniture La-z-boy Reclining Sofa prior to 12/31/2012