La-z-boy Luxury-Lift Power Recliner User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
Luxury-Lift
®
Power Recliner
Assembly Details:
F
IGURE
2
F
IGURE
4
F
IGURE
3
Luxury-Lift
®
Power Recliner
Assembly Instructions:
Power
T
ransformer Box
Power Transformer
C
onnector
7
6
F
IGURE
1
Cable Tie
Fastening Tape
Black Nonwoven Flap
F
IGURE
6
F
IGURE
5
Back and Body
Brackets Engaged
Locking Lever in Locked Position
NOTICE: Do not plug the transformer in until instructed.
1. Carefully cut the cable tie holding the Power Transformer box to the rear rail
(F
IGURE 1). Set the box aside.
2. The Power Transformer connector is tucked into the rear upholstered panel,
t
oward the bottom of the chair (F
IGURE 1
). Remove the Power Transformer
c
onnector from the upholstered panel.
3
. Roll the lift chair onto its back side. Locate the cable tie on the rear base (F
IGURE 2
).
Carefully cut the cable tie securing the lift base (F
IGURE 2).
Return the lift chair to the upright position, being careful not to pinch the
Power Transformer connector or cord.
4. Lay the back across the chair arms with the front of the back facing the seat.
Note the location of the fastening tape on the black nonwoven flap and
the fastening tape on the back seat spring rail (F
IGURE 3). Do not attach
the fastening tape at this time.
Lay the black nonwoven flap down toward the seat (F
IGURE 4).
To reduce the risk of injury:
Do not operate the unit until the back is installed and locked.
5. Install the back.
With the back across the chair arms, lift the back at a slight angle and
align the brackets on the back with the brackets on the body.
Lower the back onto the body, making sure the back and body brackets
are completely engaged (F
IGURE 5).
Lift the back upholstery cover to visually confirm that both sets
of back and body brackets are engaged (F
IGURE 5). If one or
both brackets are not engaged, remove the back and repeat
the steps above.
If you are unable to install the back properly contact your
La-Z-Boy
®
dealer for assistance.
Lock the brackets by using a screwdriver to push down the locking
levers (F
IGURE 6).
(Assembly Instructions Continued)
WARNING
Page view 3
1 2 3 4 5 6 7 8 9 ... 25 26

Comments to this Manuals

No comments